Construction with ACCROPODE™ DUNG QUAT
YEAR : 2007-2008
PROJECT : DUNG QUAT PORT PROJECT
COUNTRY : VIETNAM
CONTRACTOR : VAN OORD
CLIENT : PETROVIETNAM
HISTORY
VAN OORD was falling behind on this project and was liable to penalties.
VAN OORD called upon IDMER, now CLAS, to achieve quality and production objectives.
KEY FIGURES:
5 500 ACCROPODE™ 2 m3.
3 900 ACCROPODE™ 4 m3.
6 200 ACCROPODE™ 6,3 m3.
4 700 ACCROPODE™ 9 m3.
1 000 ACCROPODE™ 12 m3.
THE MISSION :
IDMer acted as an independent consultant with the mission:
Train and supervise the ACCROPODE ™ placement teams.
Train the site supervisor.
Train all personnel in ACCROPODE ™ specific safety.
Ensure the interface with SOGREAH and the client representative.
Optimize production.
Optimize quality.
PRODUCTION:
Production is calculated on the basis of actual installation hours. Stoppages due to bad weather, breakdowns and generally causes unrelated to the installation of ACCROPODE ™ are not taken into account in this calculation.
Taiwanese and Vietnamese divers. Production with approved quality following the training and the training given by the agents of IDMer: 
ACCROPODE ™ 2 to 6.3 m3 in straight section: 8 units per hour.
ACCROPODE ™ 9 m3 in straight section: 8 units per hour.
ACCROPODE ™ 12 m3 in head: 5 units per hour.
PROCEDURE :
The inspectors of IDMer, now CLAS, intervened several times
times a day at each ACCROPODE ™ installation station so as not to
delay work by major dismantling.
Inspections were carried out on and underwater and each inspection yielded debriefing with the ACCROPODE ™ installation team.
RESULT:
The site was delivered several months in advance and the armor in
ACCROPODE ™ accepted without reservation by the client.
VAN OORD'S COMMENT :
This first project with VAN OORD marked the start of a long collaboration
CLAS continues this tradition of excellence and security at the service of your projects
Video : http://www.youtube.com/watch?v=v5sJuDmnCvU